The unique characteristics of WEST SYSTEM make it ideal for sealing, laminating, coating and bonding timber. Control of cure or working time, can be achieved by using a choice of hardeners, and a range of fillers allow you to adjust the strength, weight, texture and sandability for a variety of applications. WEST SYSTEM brand additives can be used to modify the epoxy for increased resistance to fire, abrasion, moisture and UV light. Pump kits ensure no-mess, accurate dispensing.

Z105 Epoxy Resin:
Z105 is the base material of the WEST SYSTEM family of products, on which all of the WEST SYSTEM compounds are built. 

Z206 Slow Hardener:
206 is used for the majority of construction situations and gives extended working and cure times wile still developing it’s physical properties at room temperature.

Z205 Fast Hardener:
205 is used at lower temperatures to produce a rapid cure that develops its physical properties quickly at room temperature.

207 Special Coating Hardener

209 Extra Slow Hardener

300 Mini Pump Set:
300 Mini Pumps are designed for convenient and accurate metering of resin and hardener

Large Volume Bench Pump Dispenser

Fillers are used to thicken the basic resin/hardener mixture for specific applications. Each filler possesses a unique set of physical characteristics, but they can be generally categorized as either Adhesive (high-density) or Fairing (low-density). Adhesive filler mixtures cure to a strong, hard-to-sand plastic useful in structural applications like bonding, filleting and hardware bonding. Fairing filler mixtures cure to light, easily sandable material that is generally used for cosmetic or surface applications like shaping, filling or fairing.

403 Microfibers:
403, a fine fiber blend, is used as a thickening additive with resin/hardener to create a multi-purpose adhesive, especially for bonding wood. Epoxy thickened with microfibers has good gap-filling qualities while retaining excellent wetting/penetrating capability. Color: off-white.

404 High-Density Filler:
404 is a thickening additive developed for maximum physical properties in hardware bonding where high-cyclic loads are anticipated. It can also be used for filleting and gap filling where maximum strength is necessary. Color: off-white.

411 Filleting Blend:
411 filler is good for use in fillets. It mixes easily with epoxy and lets you create fillets that are smooth and require little sanding. Its color is a off white. It is often used as a filler for general above the water line fairing.

406 Colloidal Silica:
406 is a thickening additive used to control the viscosity of the epoxy and prevent epoxy runoff in vertical and overhead joints. 406 is a very strong filler that creates a smooth mixture, ideal for general bonding and filleting. It is also our most versatile filler. Often used in combination with other fillers, it can be used to improve the improve strength, abrasion resistance, and consistency of fairing compounds, resulting in a tougher, smoother surface. Color: off-white.

407 Low-Density Filler:
407 is a microballoon-based filler used to make fairing putties that are easy to sand or carve. Reasonably strong on a strength-to-weight basis. Cures to a dark red/brown color.

410 MicrolightTM:
410 is the ideal low-density filler for creating a light, easily-worked fairing compound especially suited for fairing large areas. Microlight mixes with greater ease than 407 Low-Density filler and is approximately 30% easier to sand. It feathers to a fine edge and is also more economical for large fairing jobs. Not recommended under dark paint or other surfaces subject to high temperatures. Cures to a tan color.

002 The Gougeon Brothers on Boat Construction
002-970 Wooden Boat Restoration & Repair
002-550 Fiberglass Boat Repair & Maintenance
002-650 Gelcoat Blisters: Diagnosis, Repair & Prevention
002-740 Final Fairing & Finishing
002-150 Vacuum Bagging Techniques

Click here to visit the manufacturer's website for more information